Cisco Small Business RV320, Administration Manual

Page: 64 / 122

System Management
Language Selection or Language Setup
64 Cisco RV320/RV325 Administration Guide
5
To upload firmware from a USB Flash drive, select Firmware Upgrade from USB
and select the file.
Language Selection or Language Setup
Use the Language Selection page or the Language Setup page to change the
language associated with the user interface and the Help for your device.
For firmware versions after 1.0.2.03, use the Language Selection page to choose a
language.
STEP 1
Navigate to System Management > Language Selection .
STEP 2
From the Select Language drop-down list, choose a language.
STEP 3
Click Save .
Alternatively, you can choose a language in the following ways:
• On the Login page, choose a language from the Language drop-down list.
• On all configuration pages, choose a language from the drop-down list at the
top right-hand corner.
For firmware versions 1.0.2.03 or earlier, use the Language Setup page to choose a
new language by uploading a language pack to your device.
STEP 1
Navigate to System Management > Language Setup .
STEP 2
From the Mode drop-down list, choose Add .
STEP 3
Enter the New Language Name .
STEP 4
Browse the Language File Name , to upload the new language file.
STEP 5
Click Save .
STEP 6
After the language pack is uploaded, choose a language from the drop-down list
at the top right-hand corner on the Language Setup or other configuration pages.