Configuring the Firewall
Configuring Basic Firewall Settings
Cisco RV215W Wireless-N VPN Firewall Administration Guide
88
8
STEP 3
Click
Save
.
Configuring Remote Management
You can enable remote management so you can access the device from a remote
WAN network.
To configure remote management, configure these settings on the
Basic Settings
page:
FTP ALG
Click
Auto
to use the default FTP port 21. Click
Manual
to enter the port number through which
you want to direct FTP traffic on the device.
Remote Management
Check
Enable
to enable remote management.
Remote Access
Choose the type of web access that can be used
to connect to the firewall: HTTP or HTTPS (secure
HTTP).
Remote Upgrade
To allow remote upgrades of the device, check
Enable
.
Allowed Remote IP
Address
Click the
Any IP Address
button to allow remote
management from any IP address, or enter a
specific IP address in the address field.
Remote Management
Port
Enter the port on which remote access is allowed.
The default port is 443. When remotely accessing
the router, you must enter the remote management
port as part of the IP address. For example:
https://<remote-ip>:<remote-port>
, or
https://168.10.1.11:443
