Configuring the Wireless Network
Configuring Basic Wireless Settings
Cisco RV215W Wireless-N VPN Firewall Administration Guide
70
7
STEP 4
If you chose B/G/N-Mixed, N-Only, or G/N Mixed, in the
Wireless Band Selection
field, select the wireless bandwidth on your network (
20MHz
or
20/40MHz
). If
you chose N-Only, you must use WPA2 security on your network. See
Configuring
the Security Mode
.
STEP 5
In the
Wireless Channel
field, choose the wireless channel from the drop-down
menu.
STEP 6
In the
AP Management VLAN
field, choose
VLAN 1
if you are using the default
settings.
If you create additional VLANs, choose a value that corresponds with the VLAN
configured on other switches in the network. This is done for security purposes.
You might need to change the management VLAN to limit access to the device
Device Manager.
STEP 7
(Optional) In the
U-APSD (WMM Power Save)
field, check
Enable
to enable the
Unscheduled Automatic Power Save Delivery (U-APSD) feature, also referred to as
WMM Power Save, that allows the radio to conserve power.
U-APSD is a power-saving scheme optimized for real-time applications, such as
VoIP, transferring full-duplex data over WLAN. By classifying outgoing IP traffic as
Voice
data, these types of applications can increase battery life by approximately
25% and minimize transmit delays.
STEP 8
(Optional) Configure the settings of the four wireless networks (see
Editing the
Wireless Network Settings
).
STEP 9
Click
Save
.
B/G-Mixed
Choose this option if you have Wireless-B and
Wireless-G devices in your network.
G/N-Mixed
Choose this option if you have Wireless-G and
Wireless-N devices in your network.
