Cisco Small Business NSS 322 Smart Storage
7
To remove the disk tray, push the silver tab down to unlock the tray,
and push the lower tab to release the tray lever. Using the tray
lever, pull the tray out.
N
OTE
If your device has the disk drives already installed, continue to
the next section,
Connecting the Equipment, page10
S
TEP
4
Position the disk drive into a disk tray. The electrical connectors of
the disk drive must face toward the back of the drive tray.
S
TEP
5
Attach the disk drive to the tray by inserting the disk drive screws
into the four holes at the bottom of the tray and tightening them
with a Phillips screwdriver.
N
OTE
Use the screws provided in the box with the device. Using
other screws can cause damage to your disk or disk tray.
There are clearly marked disk holes to accommodate the following
disk drives:
•
3.5-inch disk drive (use the included silver screws)
•
2.5-inch disk drive (use the included black screws)
277587
LAN
HDD2
HDD1
eSATA
NSS 322
Smart Storage
