Cisco Small Business NSS 322 Smart Storage
15
-
Primary DNS Server
(optional)—Enter the IP address of
the Domain Name System (DNS) server. This address is
typically provided by your Internet Service Provider (ISP).
-
Secondary DNS Server
(optional)—Enter a second DNS
server.
S
TEP
19
Click
Next
.
You are redirected to a page where you can select the services to
be enabled.
S
TEP
20
Select the services to be enabled. These services can also be
enabled or disabled at a later time. The options are:
• Network services
—Click the check box to enable Microsoft
Networking, Apple Networking, or Unix/Linux NFS.
• File services
—Click the check box to enable Web File
Manager, FTP Service, or Download Station.
• Multimedia services
—Click the check box to enable
Multimedia Station, UPnP multimedia server, or iTunes service.
• Web server services
—Click the check box to enable Web
Server or MySQL server.
S
TEP
21
Click
Next
.
You are redirected to a page where you can select the disk
configuration.
S
TEP
22
Select the disk configuration. The options are:
•
Disk configuration:
-
Do not set disk configuration
—If you have created disk
volume configuration or plan to create multiple disk
configurations, select not to initialize the disk drives.
-
Single
—Each disk is used as a standalone disk. If a disk is
damaged, all data on the damaged disk will be lost.
-
JBOD
—JBOD lets you combine multiple disks of mixed
capacities into a single logical storage device. The capacity
of the JBOD array is the sum of the total capacities of the
individual component disks (that is, it does not have the
limitation of RAID 0 where you lose some capacity when
using mixed sized disks). JBOD offers no performance
increase compared to the component disks. It has lower
reliability than the component disks, as the failure of a single
disk results, in general, in the failure of the whole array.
