Cisco SLM2024 - Small Business Smart Switch Administration Manual Download Page 35

Page: 35 / 91

VLAN Management

VLAN to Port

Cisco Small Business SLM Series Smart Switches Administration Guide

tagged or untagged and click Save. To remove the VLAN allocation to the
port, select the VLAN already assigned to the port and click Remove.

•

VLANs — Displays the VLAN from a drop-down list in which the port is a
member and whether the VLAN is tagged or not.

•

LAG — Indicates if the port is a member of a LAG. If it is a member of a LAG,
it cannot be configured to a VLAN. The LAG to which it belongs can be
configured to a VLAN.

STEP 2

Define the relevant fields.

STEP 3

Click Save Settings. The settings are modified, and the device is updated.

Summary of Contents for SLM2024 - Small Business Smart Switch




























































































Search results

Summary of Contents for SLM2024 - Small Business Smart Switch

Reviews:

Related manuals for SLM2024 - Small Business Smart Switch

Brands by name

Popular brands

Cisco SLM2024 - Small Business Smart Switch, Administration Manual

Search results

Summary of Contents for SLM2024 - Small Business Smart Switch

Reviews:

Related manuals for SLM2024 - Small Business Smart Switch

Brands by name

Popular brands