Advanced Configuration
Security
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide
33
5
STEP 3
Click Save.
Configuring Management Access List
The Security > Management Access List window specifies which Source IP
addresses can manage the device.
To configure the management access list, follow these steps:
STEP 1
Click
Security > Management Access List
.
STEP 2
Enter the following information:
•
Enable Management Access List
—Check the check box to enable IP
Access List.
•
Management IP address 1
—Enter the IP address of a device that you wish
to allow manage the switch.
•
Management IP address 2
—Enter the IP address of a second device that
you wish to allow manage the switch.
•
Management IP address 3
—Enter the IP address of a third device that you
wish to allow manage the switch.
