Advanced Configuration
Security
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide
31
5
The Security > 802.1X Parameter window displays the current 802.1X parameters.
To configure the 802.1X parameters, follow these steps:
STEP 1
Click
Security > 802.1X Parameter
.
STEP 2
Enter the following information:
•
Enable Reauthentication
—Check the check box to enable
re-authentication.
•
Reauthentication Period (1-3600 seconds)
—Enter the time period after
which a connected client must be re-authenticated. The default value is
3600 seconds.
•
EAP Timeout (1-255 seconds)
—Enter the time period during an
authentication session that the switch waits before retransmitting an EAP
packet. The default value is 30 seconds.
STEP 3
Click Save.
