Advanced Configuration
Port
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide
23
5
STEP 3
Click Save.
Displaying LACP Status
From the Port > LACP Status window, you can see the LACP status for each port,
its partner port number, and operational port key.
To display LACP status, follow these steps:
STEP 1
Click
Port > LACP Status
.
The following information is displayed:
•
LACP Port Status
—LACP Status on each interface since the device was
last refreshed.
•
Protocol Active
—Indicates if the LACP is disabled or enabled on the
interface.
•
Partner Port Number
—Indicates the port that is in the same LAG group.
•
Operational Port Key
—A channel will only be formed between ports
having the same operational port key. This only applies to ports located on
the same switch.
