Cisco SFS 7012 Hardware User'S Manual Download Page 38

Page: 38 / 176

1-28

Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide

OL-8787-05

sbe1 speed=100 fullDuplex=1 flowControl=0

Note

The command

spineip

changes the IP address for

image1

and

image2

SFS 7012 Component LEDs

Chassis Status LED

The chassis status LED is

Green

when the system is functioning normally.

The chassis status LED is

Amber

when one of the following conditions exists:

•

The system ambient temperature exceeds 52 C but remains less than 60 C.

•

Any Fan Alarm is amber.

•

Any power supply AC OK LED is off.

•

Any power supply DC OK LED is off

•

Any spine module Attention LED is on, or it has been determined that a spine is not functioning
(even if it is unable to light the LED).

•

Any leaf module Attention LED is on, or it has been determined that a leaf is not functioning (even
if it is unable to light the LED).

The chassis status LED is

Red

when the system can no longer function properly and indicates one of the

following conditions:

•

The system ambient temperature exceeded 60 degrees C.

•

No functional fan trays are present.

•

No functional spines are present.

•

No functional leaves are present.

The chassis status LED is

off

when:

•

There are no functional power supplies present.

•

There are no management cards in the system

•

AC power has been removed from the system.

Subnet Manager Agent (SMA) LED

There is a single SMA LED associated with the system. This LED is

Blue

if any external InfiniBand

links have been established. If no external IB links have been established, the LED if

off

RJ45 LEDs

The SFS 7012 RJ45 connector has two LEDs,

Act

and

100

. The

100

LED is

Green

when a 100Mbps

link is connected. The

Act

LED is

Green

when an Ethernet link has been established, and blinking when

the link is active.

Fan LEDs

Fan LEDs indicate the following status(es):

•

Green

indicates that the fan is functioning properly.

Summary of Contents for SFS 7012

















































































































































































Search results

Summary of Contents for SFS 7012

Reviews:

Related manuals for SFS 7012

Brands by name

Popular brands

Cisco SFS 7012, Hardware User'S Manual

Search results

Summary of Contents for SFS 7012

Reviews:

Related manuals for SFS 7012

Brands by name

Popular brands