4-3
Cisco SFS 7000P and SFS 7000D InfiniBand Server Switches Hardware Installation Guide
OL-10853-01
Chapter 4 Installing Field Replaceable Units
Installing a Power Supply Module
Step 3
Remove the power supply module if one is in place by pulling on the black handle. (See
Figure 4-2
.)
Figure 4-2
Removing the Power Supply from the Switch
Step 4
Insert the new power supply module into the open slot until it is fully seated. You might need to push the
unit with your thumbs to ensure that it is seated completely in the bay.
Step 5
Secure fasteners with a number 1 Phillips or a slotted screwdriver.
Step 6
Check the LEDs to verify the status of the module. (See
Figure 4-3
for the location of the LEDs.)
For more information, see the
“Power Supply LEDs” section on page 5-3
.
Figure 4-3
Power Supply LEDs
154011
154012
Power Supply
LEDs
!
