Cisco TelePresence PrecisionHD Camera
D14640.12 Cisco Telepresence PrecisionHD Camera User Guide TC6.2, August 2013.
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
10
User Guide
The orange LED is lit during a call.
The PrecisionHD Camera 720p
HDMI
• HDMI is the main video source.
• The maximum resolution is 720p30.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Power
• When the camera is used with a Cisco Codec, power is
supplied through Camera Control cable.
• When the camera is used with non-Cisco codecs, you may
have to connect power separately.
Extra camera
If you want to connect cameras in a daisy chain*:
• The first camera in the chain is powered by the camera control
cable. The other cameras must use the 12V DC Power in.
• Use an extra camera cable between the Extra Camera sockets.
Kensington lock
The Kensington lock may be used to prevent the camera being
moved from its place or to prevent theft.
HDMI video out Camera control
and power
Kensington lock
VISCA Daisy chain
Power in 12V DC
* Not supported with Codec C20
The green LED is continuously lit when
power is On, and flickers when receiving
signals from the remote control.
Contents
Introduction
The Physical Interface
Connecting the Camera
Appendices
Daisy Chaining
Video Output Format
The Physical Interface
