Removing a Policy Feature Card
This topic describes how to remove Policy Feature Card 4 (VS-F6K-PFC4=).
The procedure to remove Policy Feature Card 4, and Policy Feature Card 4XL is the same.
Note
Before You Begin
Refer to the topics
Installation Guidelines, on page 3
and
Preparing the Supervisor Engine, on page 4
.
Procedure
Step 1
Remove the nine securing screws and two cap nuts, and set them aside.
Use the supplied screws and cap nuts when securing a policy feature card to the supervisor engine.
Figure 5: Removing Securing Screws and Cap Nuts
Use care not to damage the connectors on the supervisor engine. If you damage a connector, you will have to
return the supervisor engine to Cisco for repair.
Caution
9
