Cisco ONS 15454, Hardware Installation Manual

Page: 385 / 516

NTP-G524 Install the Power Modules in the ONS 15454 M6 Shelf
This procedure installs the power modules in the ONS 15454 M6 system. Purpose
#2 Phillips screwdriver Tools/Equipment
• NTP-G252 Install the ONS 15454 M6 Shelf , on page 294 .
• NTP-G259 Open and Remove the Standard Door of the ONS 15454 M6
Shelf , on page 327
.
• Connect the chassis to the office ground. For detailed instructions on how
to ground the chassis, see the Electrostatic Discharge and Grounding Guide
for Cisco CPT and Cisco ONS Platforms .
Prerequisite Procedures
Required Required/As Needed
Onsite
Onsite/Remote
None Security Level
The plug-socket combination must be accessible at all times because it serves as the main disconnecting
device.
Statement 1019
Warning
Procedure
Step 1 Complete the necessary task as applicable:
• DLP-G569 Install the AC Power Module in the ONS 15454 M6 Shelf, on page 355
• DLP-G757 Replacing 15454-M6-AC With 15454-M6-AC2 Power module, on page 358
• DLP-G758 Replacing 15454-M6-AC2 With 15454-M6-AC Power module, on page 359
• DLP-G570 Install the DC Power Module in the ONS 15454 M6 Shelf, on page 360
• DLP-G737 Replacing 15454-M6-DC With 15454-M6-DC20 Power Module, on page 363
• DLP-G738 Replacing 15454-M6-DC20 With 15454-M6-DC Power Module, on page 365
Step 2 Complete the NTP-G256 Install Power and Ground to the ONS 15454 M6 Shelf , on page 370 .
Stop. You have completed this procedure.
DLP-G569 Install the AC Power Module in the ONS 15454 M6 Shelf
This task installs the 15454-M6-AC or 15454-M6-AC2 power module in the ONS
15454 M6 system.
Purpose
Cisco ONS 15454 Hardware Installation Guide
355
Installing the ONS 15454 M6 Shelf
NTP-G524 Install the Power Modules in the ONS 15454 M6 Shelf