![background image](http://html2.mh-extra.com/html/national-instruments/ni-pxi-1006/ni-pxi-1006_installation-manual_3437068001.webp)
PXI
™
and National Instruments
™
are trademarks of National Instruments Corporation.
323091A-01
©
Copyright 2001 National Instruments Corp. All rights reserved.
April 2001
INSTALLATION GUIDE
PXI -1006 R
ACK
M
OUNT
To mount the PXI-1006 in an instrument rack, follow the steps below.
Figure 1.
PXI-1006 in Rack Mount Configuration
1.
Remove the rubber feet and bottom feet (as required) from the
PXI-1006 chassis.
2.
Install the mounting brackets onto each side of the chassis using the
M4 x 8 flathead screws supplied. Note that you can recess the chassis
in the cabinet rack at 1 in. increments up to 3 in. (For reverse mounting,
install the brackets using the holes at the back of the chassis.)
3.
Install the chassis in the instrument rack using four screws (not
supplied).
1
Mounting Bracket
2
M4 x 8 Flathead Screw (Qty. 8)
3
Rubber Feet
4
Bottom Feet
5
Holes for Reverse Mounting
™
1
2
4
3
5
1
4