32
Step 4
Press Enter.
System Mode—IP Unnumbered
Step 1
Enter the following command at the prompt:
ONSCLI> Management-modes\sys sys=ipun
Change management configuration, are you sure? (y/n)?
Step 2
Press y.
Step 3
Assign an IP address. If system mode is IP unnumbered, use the following command:
ONSCLI>Device\Management-Configuration\IP-Configuration
IP-ADDRESS=193.69.136.104, SUBNET-MASK=255.255.255.0
For most commands, if no parameters are supplied, then all of the current parameter values are
displayed.
ONSCLI>IP-Configuration
IP-ADDRESS: 10.0.0.1
SUBNET-MASK: 255.255.255.0
DEFAULT-GATEWAY: 10.0.0.254 (optional)
Change Passwords
Step 1
Enter the following command at the prompt:
ONSCLI>ch ?
Step 2
Press Enter. The following data appears:
Usage:
Change-Passwords
[ONSCLI -PASSWORD=<string[6:12]>]
[TELNET-PASSWORD=<string[6:12]>]
By this command, TELNET and ONSCLI passwords can be changed. Both passwords can be changed
in the same command or they can be changed one by one.
Summary of Contents for ONS 15305
Page 35: ...35 ...