19
All modules support hot insertion and removal. When the module is replaced the switch must be
activated and then the MOD FAIL LED must be extinguished before the module is removed. It is also
possible to deactivate the module from the Cisco Edge Craft terminal. A special tool, the Card
Extraction Tool (
Figure 7
) is needed to remove the module.
Figure 7
Card Extraction Tool
The following service modules are described in the ONS 15305 Installation and Operations Guide:
•
Octal optical S-1.1 module (S1.1-8-LC)
•
Dual optical S-4.1 module (S4.1-2-LC)
•
Single optical S-16.1 module (S16.1-1-LC)
•
Dual optical LAN 1000BaseLX module (GigE-2-LC)
MOD
FAIL
MOD
DIS
CLASS 1
LASER
PRODUCT
S16.1-1-LC
IN
OUT
96698
MOD
FAIL
MOD
DIS
CLASS 1
LASER
PRODUCT
S16.1-1-LC
IN
OUT
Summary of Contents for ONS 15305
Page 35: ...35 ...
