Cisco ONS 15305, Quick Installation Manual

Page: 29 / 36

29
<string> is a string of graphical ASCII characters, excluding quotation marks (").
If the string contains one or more spaces, then it MUST be enclosed in
quotation marks. The maximum length of the string is context-dependent;
<MAC address> is exactly 12 hexadecimal digits;
<time> is a time-of-day of the form hh:mm:ss, where h, m and s are decimal digits;
<date> is a date of the form dd/mm/yy, where d, m and y are decimal digits;
<KLM> is a string of the form k.l.m, where k is a decimal digit in the range
[1:3], l is a decimal digit in the range [1:7], and m is a decimal digit
in the range [1:3].
<port> is a decimal integer;
<area address> is a hexadecimal string;
<system id> is a hexadecimal string;
<selector> is a hexadecimal string;
The Help Command
Press the question mark (?) key to invoke the help command. This command displays all available
commands at the current level, each with a short description. For example, typing "?" at the root level
will list the commands that are available at that level.
Command Hierarchy
In the command hierarchy, the lowest level is represented by a basic command with one or more
parameters.
If the help command is given, any other parameters are ignored and the basic command usage is
displayed.
Table entries are accessed by introducing an additional command level giving access to the entire table.
At this lowest level, the Add command (with the index and required table entries as parameters) can
be used to add an element to the table and the Edit command can be used to replace an existing element
in the table (if these operations are permitted on the table).
Similarly the Remove command (with the entry index as parameter) can be used to remove an existing
element from the table, if this is permitted.
The Show command with an entry index value as a parameter displays the specified table entry. If no
parameter is supplied with the Show command, the current content of the entire table is displayed.