Cisco Nexus 9336PQ Hardware Installation Manual Download Page 11

Page: 11 / 74

C H A P T E R

Overview

•

Overview

The Cisco Nexus 9336PQ ACI Spine Switch (N9K-C9336PQ) is a 2-rack-unit (RU) switch for the Cisco
Application-Centric Infrastructure (ACI). This switch includes the following components:

• 36 fixed 40-Gigabit Quad Small Form-factor Pluggable (QSFP+) ports

• Console and out-of-band-management ports (one each)

• Fan modules (two)

• Port-side intake version with burgundy coloring (N9K-C9300-FAN3)

• Port-side exhaust version with blue coloring (N9K-C9300-FAN3-B)

• Power supplies (two—one required for operations and an optional one for redundancy)

• 1200-W AC power supply with port-side intake airflow (burgundy coloring) (N9K-PAC-1200W)

• 1200-W AC power supply with port-side exhaust airflow (blue coloring) (N9K-PAC-1200W-B)

• 1200-W HVAC/HVDC power supply with dual-direction airflow (white coloring)

(N9K-PUV-1200W)

• 930-W DC power supply with port-side intake airflow (green coloring) (UCSC-PSU-930WDC)

• 930-W DC power supply with port-side exhaust airflow (gray coloring) (UCS-PSU-6332-DC)

The following figure shows the hardware features seen on the power supply side of the chassis.

Cisco Nexus 9336PQ ACI-Mode Switch Hardware Installation Guide

Summary of Contents for Nexus 9336PQ











































































Search results

Summary of Contents for Nexus 9336PQ

Reviews:

Related manuals for Nexus 9336PQ

Brands by name

Popular brands

Cisco Nexus 9336PQ, Hardware Installation Manual

Search results

Summary of Contents for Nexus 9336PQ

Reviews:

Related manuals for Nexus 9336PQ

Brands by name

Popular brands