Cisco Nexus 2000 Series, Installation Manual

Page: 163 / 190

B-9
Cisco Nexus 2000 Series Hardware Installation Guide
Appendix B Technical Specifications
Airflow Optimization Accessories
Airflow Optimization Accessories
This section describes the airflow optimization accessories for the Cisco Nexus FEX.
For the details of the Cisco Nexus airflow extension sleeve and the Cisco Nexus airflow vent, see
Table B-7 .
Table B-6 Cable Specifications for the 10-Gbps SFP+ Copper Transceivers
Transceiver Cable Length
SFP-H10GB-CU7M 23.0 feet (7 meters)
SFP-H10GB-CU10M 32.8 feet (10 meters)
Table B-7 Airflow Optimization Accessories
Accessories Airflow Extension Sleeve Airflow Vent
PID NXA-AIRFLOW-SLV (2200 Series)
NXA-AIRFLOW-SLV-E (2300 Series) NXA-ACC-KIT-BAV
Name Cisco Nexus Airflow Extension Sleeve Cisco Nexus Airflow Vent
Description Optimizes airflow in port side exhaust
airflow deployments (port side exhaust)
for alignment of port in back of rack and
extension of power supply side of
chassis to port side exhaust of rack with
airflow sleeve Optimizes airflow in port side intake top
of rack deployments (port side intake).
Airflow vent consists of metallic cover to
place on the upper exhaust of the FEX
port side and mounting rails with snap on
holes for airflow vent.
Dimensions
(height x width x
depth)
1.72" (1RU) x 17.3" x 8.5"(fully
retracted)* or 12.9"(fully extended)*
*Adjustable depth for the FEX, between
26 and 30 inches
Vent cover is part of the mounting
hardware kit and its size is meaningless
to overall form factor of the chassis:
0.42" x 17.53" x 2.56"
Weight 5.7 lbs or 2.6 kg 0.42 lbs or 0.19 kg