C
ASSATT
A
CTIVE
R
ESPONSE
C
ONTROL
N
ODE
AND
N
ETWORK
S
WITCH
C
ABLING
E
XAMPLE
18
Table 1 shows how each port is used on the switch and control node.
Table 1
Description of Panel and Main Board Notation
Notation
Description
ISL-1
Used to create the first half of interswitch link (ISL)
connection between the two Cisco switches.
ISL-2
Used to create the second half of the ISL connection
between the two Cisco switches.
GW-1
Used to create the first connection from the Cisco switch
to the gateway.
GW-2
Used to create the second connection from the Cisco
switch to the gateway.
C1-1
Used to connect the first control node’s first onboard
Gigabit Ethernet connection (Gb 1) into the Cassatt Active
Response environment through the designated switch port.
C1-2
Used to connect the first control node’s first onboard
Gigabit Ethernet connection (Gb 2) into the Cassatt Active
Response environment through the designated switch port.
C2-1
Used to connect the second control node’s second onboard
Gigabit Ethernet connection (Gb 2) into the Cassatt Active
Response environment through the designated switch port.
C2-2
Used to connect the second control node’s second onboard
Gigabit Ethernet connection (Gb 2) into the Cassatt Active
Response environment through the designated switch port.
C1-P
Used to connect the first control node remote management
controller into the Cassatt Active Response environment.
C2-P
Used to connect the second control node remote
management controller into the Cassatt Active Response
environment.
N1-1 through N23-1
Used to connect application nodes into the Cassatt Active
Response environment.
N2-1 through N23-2
Used to connect application nodes into the Cassatt Active
Response environment.
