QoS Classification Commands
All commands applicable for the Cisco NCS 5500 Series Router are also supported on the Cisco NCS 540
Series Router that is introduced from Cisco IOS XR Release 6.3.2. References to earlier releases in Command
History tables apply to only the Cisco NCS 5500 Series Router.
Note
This chapter describes the commands used for QoS packet classification.
•
class (policy-map), on page 2
•
class-map, on page 4
•
end-class-map, on page 6
•
end-policy-map, on page 7
•
hw-module profile qos ingress-model peering, on page 8
•
hw-module profile qos max-classmap-size, on page 9
•
hw-module profile stats qos-enhanced, on page 10
•
match access-group, on page 11
•
match cos, on page 13
•
match dei, on page 15
•
match dscp, on page 16
•
match mpls experimental topmost, on page 19
•
match precedence, on page 21
•
match protocol, on page 23
•
match qos-group, on page 25
•
random-detect discard-class, on page 27
•
set cos , on page 29
•
set dei, on page 30
•
set discard-class, on page 31
•
set dscp, on page 33
•
set mpls experimental, on page 34
•
set precedence, on page 35
•
set qos-group, on page 37
•
shape average, on page 39
Modular QoS Command Reference for Cisco NCS 5500 Series and Cisco NCS 540 Series Routers
1
