Cisco NCS 540 Series Command Reference Manual Download Page 66 | Manualshive

Page: 66 / 84

background image

show policy-map targets

To display information about the interfaces on which policy maps are applied, use the

show policy-map

targets

command in XR EXEC mode.

show policy-map targets

[{

location node-id

|

pmap-name name

|

type qos

[{

location

node-id

|

pmap-name name

}]}]

Syntax Description

(Optional) Displays information about the interfaces on which policy maps are applied
for the specified location. The

node-id

argument is entered in the

rack/slot/module

notation.

location node-id

(Optional) Displays information about the interfaces on which the specified policy map
is applied.

pmap-name name

(Optional) Displays information about the interfaces on which QoS policy maps are
applied. This is the default type.

type qos

Command Default

The default QoS policy type is QoS.

Command Modes

XR EXEC mode

Command History

Modification

Release

This command was introduced.

Release 6.0

Usage Guidelines

For a short period of time while a QoS policy is being modified, there might not be any policy in effect on
the interfaces in which the modified policy is used. For this reason, modify QoS policies that affect the fewest
number of interfaces at a time. Use the

show policy-map targets

command to identify the number of

interfaces that will be affected during policy map modification.

Task ID

Operations

Task
ID

read

qos

Examples

In this example, the TenGigabit Ethernet interface 4/0/10/0 has one policy map attached as a main
policy. Outgoing traffic on this interface will be affected if the policy is modified:

RP/0/RP0/CPU0:router#

show policy-map targets

Wed Dec

2 22:35:13.993 UTC

1) Policymap: test-qlimit

Type: qos

Targets (applied as main policy):

TenGigE0/4/0/10/0 output
TenGigE0/6/0/30/1 output

Total targets: 2

Targets (applied as child policy):
Total targets: 0

Modular QoS Command Reference for Cisco NCS 5500 Series and Cisco NCS 540 Series Routers

60

Congestion Management Commands

show policy-map targets

«
...
64
65
66
67
68
...
»

Summary of Contents for NCS 540 Series





















































































Reviews:

No comments

Related manuals for NCS 540 Series

Brand: IBM Pages: 72

8BIG RACK THUNDERBOLT 2

Brand: LaCie Pages: 28

Brand: Juniper Pages: 502

Azure StorSimple 8100

Brand: Microsoft Pages: 12

Brand: YATO Pages: 96

Brand: ActionTec Pages: 115

Brand: Gigabyte Pages: 18

Brand: Datalogic Pages: 2

Brand: Valcom Pages: 4

Brand: ZyXEL Communications Pages: 1

Brand: Korenix Pages: 3

Brand: Crestron Pages: 44

Brand: Zte Pages: 36

Brand: MikroTik Pages: 18

Brand: QNAP Pages: 61

VOD-W Server VBrick v4.2.3

Brand: VBrick Systems Pages: 92

Brand: Aztech Pages: 2

Brand: Excito Pages: 154

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands