Cisco Linksys X1000, User Manual

Page: 171 / 678

16
Advanced Configuration
Linksys X1000
WPA2 Enterprise
This option features WPA2 used in coordination with a RADIUS server . (This
should only be used when a RADIUS server is connected to the router .)
NOTE
If you select WPA2 Enterprise as your Security Mode, each device
in your wireless network MUST use WPA2 Enterprise and the same
shared key .
RADIuS Server
Enter the IP address of the RADIUS server .
RADIuS Port
Enter the port number of the RADIUS server . The default is
1812
.
Shared Key
Enter the key shared between the router and the server .
WPA Enterprise
This option features WPA used in coordination with a RADIUS server . (This
should only be used when a RADIUS server is connected to the router .)
NOTE
If you select WPA Enterprise as your Security Mode, each device
in your wireless network MUST use WPA Enterprise and the same
shared key .
RADIuS Server
Enter the IP address of the RADIUS server .
RADIuS Port
Enter the port number of the RADIUS server . The default is
1812
.
Shared Key
Enter the key shared between the router and the server .
WEP
WEP is a basic encryption method, which is not as secure as WPA .
NOTE
If you select WEP as your Security Mode, each device in your
wireless network MUST use WEP and the same encryption and
shared key .
Encryption
Select a level of WEP encryption,
(40/64-bit 10 hex digits)
or
104/128-bit (26 hex digits)
. The default is
40/64-bit (10 hex digits)
.
Passphrase
Enter a passphrase to automatically generate the WEP key . Then
click
Generate
.
Key 1
If you did not enter a passphrase, enter the WEP key manually .