Basic Administration of the SPA9000
Using the Interactive Voice Response Unit
SPA9000 Voice System Administration Guide
45
2
NOTE
The items marked with “Requires Password” only require a password if the
Administrator password is set.
Entering a Password through the IVR
To input the password using the phone keypad, the following translation
conventions apply:
•
To input: A, B, C, a, b, c—press “2’
•
To input: D, E, F, d, e, f—press “3’
•
To input: G, H, I, g, h, i—press “4’
•
To input: J, K, L, j, k, l— press “5’
•
To input: M, N, O, m, n, o—press “6’
•
To input: P, Q, R, S, p, q, r, s—press “7’
•
To input: T, U, V, t, u, v—press “8’
•
To input: W, X, Y, Z, w, x, y, z—press “9’
•
To input all other characters in the Administrator account password, press “0’
For example, to input password test#@1234 by phone keypad, you need to press
the following sequence of digits: 8378001234. This translation convention only
applies to the password input.
STEP 1
After entering a value, press the # (pound) key to indicate end of input.
•
To save value, press 1.
•
To review the value, press 2.
•
To re-enter the value, press 3.
•
To cancel the value entry and return to the main configuration menu, press
*
’
(star).
