Linksys E-Series
Advanced Configuration
PPTP
Wireless > Basic Wireless Settings
Point-to-Point Tunneling Protocol (PPTP) is a service that generally applies to
connections in Europe If your PPTP connection supports DHCP or a dynamic IP
The basic settings for wireless networking are set on this screen
address, then select
obtain an IP Address Automatically
If you are required
to use a fixed IP address to connect to the Internet, then select
Specify an IP
Address
and configure the options below
L2TP
settings
noTE
After you set up the wireless network(s), set up the wireless security
Layer 2 Tunneling Protocol (L2TP) is a service that generally applies to
connections in Israel
Wireless Settings
Telstra Cable
Telstra Cable is a service that generally applies to connections in Australia
Connect on Demand or Keep Alive
The Connect on Demand and Keep Alive options let you choose whether
the router connects to the Internet only as needed (useful if your ISP charges
network Mode
Select the wireless standards your network will support
for connect time), or if the router should always be connected Select the
appropriate option
•
Mixed
If you have Wireless-N (2 4 GHz), Wireless-G, and Wireless-B devices
in your network, keep the default,
Mixed
•
Wireless-B/G only
If you have both Wireless-B and Wireless-G (2 4 GHz)
devices in your network, select
Wireless-B/G only
•
Wireless-B only
If you have only Wireless-B devices, select
Wireless-B
only
•
Wireless-G only
If you have only Wireless-G devices, select
Wireless-G
only
•
Wireless-n only
If you have only Wireless-N (2 4 GHz) devices, select
Wireless-n only
•
Disabled
If you have no Wireless-B, Wireless-G, and Wireless-N (2 4 GHz)
devices in your network, select
Disabled
noTE
If you have a dual-band router, you can select Mixed, Wireless-A
Only, Wireless-N Only, or Disabled for the 5 GHz band
If you are not sure which mode to use, keep the default,
Mixed
6
