Cisco LightStream 1010, Hardware Installation Manual

Page: 21 / 40

C H A P T E R
2
Installation Preparation
• Installation Warnings, on page 17
• Position the Chassis, on page 20
• Safety Recommendations, on page 20
• Maintain Safety with Electricity, on page 21
• Prevent ESD Damage, on page 21
• Site Environment, on page 22
• Site Considerations, on page 22
• Power Supply Considerations, on page 22
• Rack Configuration Considerations, on page 23
Installation Warnings
Read the Regulatory and Compliance Information document before installing the chassis.
Take note of the following warnings:
Statement 1071— Warning Definition
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work
on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents. Use the statement number provided at the end of each warning to locate
its translation in the translated safety warnings that accompanied this device.
SAVE THESE INSTRUCTIONS
Warning
Statement 12— Power Supply Disconnection Warning
Before working on a chassis or working near power supplies, unplug the power cord on AC units; disconnect
the power at the circuit breaker on DC units.
Warning
Cisco Firepower 1010 Hardware Installation Guide
17