Cisco ISR 4000 series Configuration Manual Download Page 31 | Manualshive

Page: 31 / 66

background image

Cisco ISR 4000 Family Routers Administrator Guidance

Page

31

of

66

Crypto map entries also include transform sets. A transform set is an acceptable combination of
security protocols, algorithms, and other settings that can be applied to IPsec-protected traffic.
During the IPsec SA negotiation, the peers agree to use a particular transform set when protecting
a particular data flow.

4.6.1.1

IKEv1 Transform Sets

An Internet Key Exchange version 1 (IKEv1) transform set represents a certain combination of
security protocols and algorithms. During the IPsec SA negotiation, the peers agree to use a
particular transform set for protecting a particular data flow.

Privileged administrators can specify multiple transform sets and then specify one or more of these
transform sets in a crypto map entry. The transform set defined in the crypto map entry is used in
the IPsec SA negotiation to protect the data flows specified by that crypto map entry's access list.

During IPsec security association negotiations with IKE, peers search for a transform set that is
the  same  at  both  peers.  When  such  a  transform  set  is  found,  it  is  selected  and  applied  to  the
protected  traffic  as  part  of  both  peers'  IPsec  SAs.  (With  manually  established  SAs,  there  is  no
negotiation with the peer, so both sides must specify the same transform set.)

Note:

If a transform set definition is changed during operation that the change is not applied to

existing security associations, but is used in subsequent negotiations to establish new SAs. If you
want the new settings to take effect sooner, you can clear all or part of the SA database by using
the

clear crypto sa command

.

The following settings must be set in configuring the IPsec with IKEv1 functionality for the
TOE

:

TOE-common-criteria #

conf t

TOE-common-criteria (config)#

crypto isakmp policy 1

TOE-common-criteria (config-isakmp)#

hash sha

Note: md5 is not to be used in the evaluated configuration.

TOE-common-criteria (config-isakmp)#

encryption aes

This configures IPsec IKEv1 to use AES-CBC-128 for payload encryption. AES-
CBC-256 can be selected with ‘

encryption aes 256

’. These are the only allowed

ciphers in the evaluated configuration, and the other, less secure ciphers, are not to
be used.

Note:

the authorized administrator must ensure that the keysize for this setting is

greater than or equal to the keysize selected for ESP in Section 4.6.2 below. If AES
128 is selected here, then the highest keysize that can be selected on the TOE for
ESP is AES 128.

Note:

Both confidentiality and integrity are configured with the hash sha and

encryption aes commands respectively. As a result, confidentiality-only mode is
disabled.

TOE-common-criteria (config-isakmp)#

authentication pre-share

«
...
29
30
31
32
33
...
»

Summary of Contents for ISR 4000 series



































































Reviews:

No comments

Related manuals for ISR 4000 series

Brand: LaCie Pages: 4

Brand: LaCie Pages: 4

Brand: LaCie Pages: 4

SISPM1040-582-LRT

Brand: Lantronix Pages: 2

Brand: Lantronix Pages: 7

Maestro E220 Series

Brand: Lantronix Pages: 25

Brand: CSS Pages: 2

301300U - Ethernet Disk NAS Server

Brand: LaCie Pages: 62

Brand: Z-Com Pages: 18

X-Pedition XSR-1850

Brand: Enterasys Pages: 114

Brand: Netequalizer Pages: 14

Brand: XtendLan Pages: 17

Brand: Acard Pages: 43

Brand: Open House Pages: 2

BNI EIP-508 05-Z015 Series

Brand: Balluff Pages: 74

Brand: Hitachi Pages: 208

Brand: Hitachi Pages: 36

Brand: ADTRAN Pages: 162

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands