B e t a D r a f t - C i s c o C o n f i d e n t i a l
2-15
Cisco Identity Services Engine Appliance Hardware Installation Guide 1.0
OL-22971-01
Chapter 2 Introducing the Cisco ISE-3300 Series Hardware
ISE-3315, ISE-3355, and ISE-3395 Hardware Summary
Figure 2-13
Cisco ISE-3395 Front Panel LEDs/Buttons
4
Power Button with LED Indicator (bi-color:
green/amber)
11
Empty (unused) HDD Bay
1
5
Operator Information Panel
12
HDD Bay 3
6
Operator Information Panel Release Switch
13
HDD Bay 1
7
Video Port
1.
Cisco does not support installing additional hard drives in the ISE-3395 appliance.
1
HDD Activity LED
Green = Hard disk drive activity
Flashing Green = Hard disk drive activity
Off = Hard disk drive is idle or disabled
2
HDD Status LED
Amber = Hard disk drive is in error state
Off = Hard disk drive is functioning or disconnected from power
3
Power Switch Button Cover
Cover slides left or right to expose or protect power switch
4
Ethernet Icon LED
Green = Ethernet interfaces are configured and up
Off = No Ethernet interfaces are currently configured or
Ethernet interfaces are all down
5
Ethernet Interface Activity
LEDs (NIC 1 and NIC 2)
Green = Activity exists
Flashing green = Activity exists
Off = No activity exists
6
Information LED
Amber = A non-critical system event has occurred
Off = System is functioning normally
7
System Health LED
Off = System health is normal
Amber = A pre-failure system threshold has been reached,
which can be caused by any of the following conditions:
•
At least one fan failure (system or processor fan)
•
At least one of the temperature sensors reached critical level
(system or processor thermal sensors)
•
At least one memory module failure
•
A power supply unit error has occurred
Cisco ISE 3395 Series
Identity Services Engine
195207
CISCO
1
2
3
4
5
6
7
8
9
10
