Cisco ISDN GW 3241 Page 48 Online Help Manual Download | Manualshive

Page: 48 / 116

background image

Adding and updating users

Cisco TelePresence ISDN Gateways v2.0 Online help (Printable format)

48 of 116



at least two numeric characters



at least two non-alphanumeric (special)
characters



not more than two consecutive
repeating characters. That is, two
repeating characters are allowed, three
are not

In advanced security mode, a password must
be different from the previous ten used with that
account. Also, a password will expire if it is not
changed within 60 days.

If the ISDN gateway is not using advanced
security mode, any password can be used.

Note that passwords are stored in the
configuration.xml file as plain text unless the
ISDN gateway is configured (or has ever been
configured) to use advanced security mode. For
more information, refer to

Configuring security

settings

.

Note that this field is only active when adding a
new user. If you are updating an existing user
and wish to change that user's password, you
should use the

Change password

control

instead.

Re-enter
password

Verifies the required password.

Disable user
account

Select to disable this account.

This can be useful if you want to keep an
account's details, but do not want anyone to be
able to use it at the moment.

You cannot disable the system-created admin
account.

The system-created guest account is disabled
by default. If you enable it and the ISDN
gateway is in advanced security mode, the
ISDN gateway will create a security warning.

In advanced security mode, a non-admin
account will expire after 30 days of inactivity;
that is, the ISDN gateway will disable it. To re-
enable a disabled account, uncheck this option.

For more information about advanced security
mode, refer to

Configuring security settings

.

Lock password

Prevents user from changing
password.

This is useful where you want multiple users to
be able to use the same user ID. The system-
created guest account has

Lock password

enabled by default.

Force user to
change

Select this option to force a user
to change their password. Next

This option is enabled by default for a newly
created account. It is a good idea for new users

«
...
46
47
48
49
50
...
»

Summary of Contents for ISDN GW 3241





















































































































Reviews:

No comments

Related manuals for ISDN GW 3241

Brand: RTA Pages: 72

Brand: Yeastar Technology Pages: 66

Brand: Hypercom Pages: 2

ZyXEL ZyWALL 10W

Brand: ZyXEL Communications Pages: 2

Brand: Gree Pages: 31

Brand: Asus Pages: 39

Brand: AVM Pages: 12

Brand: DAVIS Pages: 8

Brand: ZyXEL Communications Pages: 2

P-661HNU Series

Brand: ZyXEL Communications Pages: 2

Brand: ZyXEL Communications Pages: 361

Brand: ZyXEL Communications Pages: 206

Brand: ZyXEL Communications Pages: 466

Brand: TENETICS, LLC Pages: 12

Brand: Planet Networking & Communication Pages: 2

Brand: Wireless Devices Pages: 32

Brand: 2Wire Pages: 4

Brand: Baytec Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands