Figure 24: USB Cover Finished Installation
Step 8
Slide the Pluggable Module into the device as shown in
Figure 25: Pluggable Module Insert, on page 42
. The latch
lock screw (
1
) aligns with the screw hole (
2
) on the front of the device. Push the Pluggable Module all the way into the
device until you feel it seat, and then torque the latch lock screw 8-10 inch-pound (0.9 to 1.1 newton meter).
IR1101 Industrial Integrated Services Router Hardware Installation Guide
41
Installing the Router
Pluggable Module
