Memory
The Cisco IR1101 uses flash memory and main memory. The flash memory contains the Cisco OS software
image and the boot flash contains the ROMMON boot code. The memory includes:
• 4 GB DRAM (soldered down)
• 4 GB onboard flash memory
Reset Button
The Reset button resets the router configuration to the default configuration set by the factory. To restore the
router configuration to the default configuration set by the factory, use a standard size #1 paper clip with wire
gauge 0.033 inch or smaller and simultaneously press the reset button while applying power to the router.
Supported Cisco Antennas and Antenna Accessories
The IR1101 must have a Pluggable Module with antenna ports installed in order to connect antennas. The
base unit does not have any wireless capabilities on its own.
The
Antenna Selection and Installation
chapter lists the supported Antennas and Accessories for the Cisco
IR1101 with a wireless Pluggable Module. For detailed information about Cisco Antennas for the Industrial
Routers, please refer to the following guide:
Cisco Industrial Routers and Industrial Wireless Access Points Antenna Guide:
Modem Support
The Cisco IR1101 wireless Pluggable Module uses the Sierra Wireless series modems. The software download
page can be found here:
https://software.cisco.com/download/navigator.html?mdfid=286288566&flowid=76082
and
shows the technology details for the modems.
Table 8: Modem Technology Supported
Technology Supported
Description
Modem
Used
SKU ID
LTE CAT4: B4, B13
U.S. (Verizon) Single
Micro SIM
WP7601-G
P-LTE-VZ
LTE CAT4:B2,B4,B5,B12
3G UMTS DC-HSPA+, HSPA+, HSPA, WCDMA: B2,B4, B5
North America
(AT&T) Dual Micro
SIM
WP7603-G
P-LTE-US
LTE CAT4: B1,B3, B5, B8, B20, B28
3G UMTS DC-HSPA+, HSPA+, HSPA, WCDMA: B1, B5, B8
GPRS/EDGE: 900/1800
Europe Dual Micro
SIM
WP7607-G
P-LTE-GB
IR1101 Industrial Integrated Services Router Hardware Installation Guide
21
Product Overview
Memory
