18
For minimum software requirements, refer to the Release Notes for your platform.
For an up-to-date list of supported SFP models for Cisco Industrial Ethernet switches, see
For installation instructions, see your SFP module documentation and the
Installing and Removing SFP Modules, page 64
.
For cable specifications, see the
.
SFP Module Patch Cable
The switch uses an SFP-module patch cable, a 0.5-meter, copper, passive cable with SFP module connectors at each
end (see
). The patch cable connects two switches in a cascaded configuration.
Figure 8
SFP-Module Patch Cable
See the
Installing and Removing SFP Modules, page 64
for information about using the SFP module patch cable.
You can order this cable (part number CAB-SFP-50CM=).
LEDs
You can use the LEDs to monitor the switch status, activity, and performance.
and
show the front panel LEDs.
Extended temperature SFPs
23 to 185°F (-5°C to 85°C)
SFP-GE-L with DOM support
SFP-GE-S with DOM support
SFP-GE-T
SFP-GE-Z with DOM support
GLC-LH-SMD with DOM support
GLC-EX-SMD with DOM support
GLC-SX-MMD with DOM support
GLC-TE
GLC-ZX-SMD with DOM support
Table 2
SFP Module Maximum Operating Temperature by Model (continued)
SFP Module
Model
126
8
09
