Cisco HWIC, Configuration Manual

Page: 106 / 188

6-18
Cisco Wireless ISR and HWIC Access Point Configuration Guide
OL-6415-04
Chapter 6 Configuring Authentication Types
Matching Access Point and Client Device Authentication Types
EAP-MD5 authentication
If using ACU to
configure card Create a WEP key, enable Host
Based EAP, and enable Use Static
WEP Keys in ACU and select
Enable network access control
using IEEE 802.1X and
MD5-Challenge as the EAP Type
in Windows 2000 (with Service
Pack 3) or Windows XP Set up and enable WEP and enable
EAP and Open authentication for
the SSID
If using Windows XP
to configure card Select Enable network access
control using IEEE 802.1X and
MD5-Challenge as the EAP Type Set up and enable WEP and enable
EAP and Open Authentication for
the SSID
PEAP authentication
If using ACU to
configure card Enable Host Based EAP and Use
Dynamic WEP Keys in ACU and
select Enable network access
control using IEEE 802.1X and
PEAP as the EAP Type in Windows
2000 (with Service Pack 3) or
Windows XP Set up and enable WEP and enable
EAP and Open authentication for
the SSID
If using Windows XP
to configure card Select Enable network access
control using IEEE 802.1X and
PEAP as the EAP Type Set up and enable WEP and enable
Require EAP and Open
Authentication for the SSID
EAP-SIM authentication
If using ACU to
configure card Enable Host Based EAP and Use
Dynamic WEP Keys in ACU and
select Enable network access
control using IEEE 802.1X and
SIM Authentication as the EAP
Type in Windows 2000 (with
Service Pack 3) or Windows XP Set up and enable WEP with full
encryption and enable EAP and
Open authentication for the SSID
If using Windows XP
to configure card Select Enable network access
control using IEEE 802.1X and
SIM Authentication as the EAP
Type Set up and enable WEP with full
encryption and enable Require EAP
and Open Authentication for the
SSID
1.
Table 6-2 Client and Access Point Security Settings (continued)
Security Feature Client Setting Access Point Setting