Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved.
Page 67 of 177
Save the LAN settings by clicking the
Save
button. Alternatively, clear the
settings by clicking the
Reset
button.
7.5.2. Wireless settings
Modifying the wireless settings
The
WIRELESS RADIO
window contains controls to change the following
settings:
• The shared network passphrase.
• The national territory in which the wireless network is installed.
• The operational radio frequency and bandwidth settings.
To change the Wireless Settings, do the following steps:
1. Click the
-wireless radio
link under
GENERAL SETTINGS
in the
left-hand settings menu.
• The
WIRELESS RADIO
dialog will be shown (
Figure 26. Configurator GUI (Wireless Radio dialog)
2. Enter a defined network passphrase in the Shared Passphrase
field.
IMPORTANT
If the Cisco FM3500 Endo was purchased in the USA or
Canada, the Country selection is set to the country of purchase,
and the
Country:
drop-down will be disabled.
