Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved.
Page 101 of 177
Figure 38. Configurator (Pass list / Block list dialog)
• The
Pass list / Block list
dialog will be shown (
2. Choose the type of list to be uploaded by clicking the correct
List
Type:
radio button.
3. Click the
Choose File
button. Upload the saved *.CSV file using
the upload dialog.
• The contents of the uploaded *.CSV file will be shown in
the
Pass list / Block list Status
section.
To apply the list settings contained in the *.CSV file, click the
Apply
Settings
button.
To clear the Pass list or Block list settings without deleting the *.CSV file,
click the
Clear Pass list or Block list
button.
To delete the Pass list or Block list *.CSV file, click the
Reset
button.
7.7.5. Multicast
Multicast management for mesh network-capable devices
Multicast is a group-communication method in which data transmissions are
addressed simultaneously to more than one destination computer. Multicast
transmissions can be point-to-multipoint, or multipoint-to- multipoint.
By default, if CCTV cameras and devices that operate in a similar fashion
are linked to a Fluidmesh transceiver unit operating in
Mesh Point
mode,
the unit forwards all multicast traffic generated by the cameras to the closest
Mesh End
unit in the wireless network.
