1-19
Cisco Flex 7500 Series Wireless Controller Installation Guide
Chapter 1 Cisco Flex 7500 Series Wireless Controller Installation Guide
Front Panel
•
Hard disk drive status LEDs:
This LED is used to indicate the status of the SAS hard disk drives.
When this LED is lit, it indicates that the drive has failed. When this LED is flashing slowly (one
flash per second), it indicates that the drive is being rebuilt. When the LED is flashing rapidly (three
flashes per second), it indicates that the controller is identifying the drive.
•
Hard disk drive activity LED
s: Each hot-swap hard disk drive has an activity LED, and when this
LED is flashing, it indicates that the drive is in use.
•
Optical drive eject button:
Press this button to release a DVD or CD from the DVD drive.
•
Optical drive activity LED:
When this LED is lit, it indicates that the DVD drive is in use.
•
Operator information panel:
This panel contains controls and LEDs that provide information
about the status of the controller. For information about the controls and LEDs on the operator
information panel, see
Operator Information Panel, page 1-19
.
•
Operator information panel release latch:
Slide the blue release latch to the left to pull out the
light path diagnostics panel and view the light path diagnostics LEDs and buttons. See
Light Path
Diagnostics Panel, page 1-20
for more information about the light path diagnostics.
•
Video connector:
Connect a monitor to this connector. The video connectors on the front and rear
of the controller can be used simultaneously. Controller configuration and management is only
supported via the serial console connection. Controller configuration and management is not
supported using the keyboard and monitor directly connected to the controller.
Note
The maximum video resolution is 1600 x 1200 at 75 Hz.
•
USB connectors:
Connect a USB device, such as a USB mouse or keyboard, to any of these
connectors. During normal operation, this USB slot is not used by the 7500 Series Wireless
Controller.
Operator Information Panel
Figure 1-3
shows a detailed view of the controls and LEDs on the operator information panel.
Figure 1-3
Close Up of Cisco Flex 7500 Operator Information Panel
2
1
4
3
Ethernet
a
ctivity LED
s
Loc
a
tor
bu
tton/
loc
a
tor LED
Inform
a
tion LED
S
y
s
tem-error LED
Rele
as
e l
a
tch
Power-control
bu
tton/
power-on LED
Ethernet
a
ctivity LED
s
Power-control
bu
tton cover
Ethernet
icon LED
255126
