2 -8
Firepower 7000 Series Hardware Installation Guide
Chapter 2 Hardware Specifications
Firepower 7000 Series Devices
Figure 2-7
Firepower 7110 and 7120 Front Panel
The front panel of the chassis houses LEDs, which display the system’s operating state. The following
table describes the LEDs on the front panel.
Table 2-11
Firepower 7110 and 7120 Front Panel Components
A
USB 2.0 connector
E
NIC1 activity LED
B
Reset button
F
Solid-state drive activity LED
C
NIC2 activity LED
G
ID button
D
System status LED
H
Power button and LED
Table 2-12
Firepower 7110 and 7120 Front Panel LEDs
LED
Description
NIC activity (1 and 2)
Indicates whether there is any network activity:
•
A green light indicates there is network activity.
•
No light indicates there is no network activity.
System status
Indicates the system status:
•
No light indicates the system is operating normally, or is powered off.
•
A red light indicates a system error.
See the
Table 2-13Firepower 7110 and 7120 System Status, page 2-9
for more information.
Reset button
Allows you to reboot the appliance without disconnecting it from the power supply.
Solid-state drive (SSD)
activity
Indicates the SSD status:
•
A blinking green light indicates the fixed disk drive is active.
•
An amber light indicates a fixed disk drive fault.
•
If the light is off, there is no drive activity or the system is powered off.
System ID
Helps identify a system installed in a high-density rack with other similar systems:
•
A blue light indicates the ID button is pressed and a blue light is on at the rear of the
appliance.
•
No light indicates the ID button is not pressed.
Power button and LED
Indicates whether the appliance has power:
•
A green light indicates that the appliance has power and the system is on.
•
A blinking green light indicates that the appliance has power and is shut down.
•
If the light is off, the system does not have power.