7
Cisco Edge 340 Series Installation Guide
OL-29523-01
Installing the Cisco Edge 340 Series
Installing the Cisco Edge 340 Series
You can install the Cisco Edge 340 Series on a wall or a pillar, a metal pole, or a ceiling T-joint by using
the wall-mount kit. You can also install the Cisco Edge 340 Series on almost any Video Electronics
Standards Association (VESA)-compliant flat-panel display that is attached to a third-party VESA
bracket. Besides, you can mount the Cisco Edge 340 Series on a desk or table vertically by using the
desktop-mount bracket.
Equipment That You Need
•
Phillips screwdriver
•
Scratch awl or other sharp-pointed object (wall-mount)
•
Electric drill with a 6-mm drill bit (wall-mount)
•
Crescent wrench or socket wrench
•
Pencil
•
Bubble level or laser level
Before You Begin
Before installing the Cisco Edge 340 Series, verify that these guidelines are met:
•
Front clearance so that the LEDs can be seen.
•
AC power cord reaches from the AC power outlet to the rear-panel connector.
•
Cabling is away from sources of electrical noise, such as radios, power lines, and fluorescent
lighting. Make sure that the cabling is safely away from other devices that might damage the cables.
•
Airflow around the Cisco Edge 340 Series is unrestricted.
•
Temperature around the unit does not exceed 45°C.
Gigabit
Ethernet
Off
No link.
Blue
Link up.
Blinking blue
Activity.
WiFi (AP
and client)
Off
WiFi is disabled.
Solid blue
WiFi is enabled and functioning.
Blinking blue
WiFi is transmitting data.
Bluetooth
Off
Bluetooth is disabled.
Solid blue
Bluetooth is enabled and functioning.
Blinking blue
Bluetooth is transmitting data.
Storage
Off
Storage is not active.
Blinking blue
Storage is active.
Table 2
LEDs (continued)
LED
Color
Meaning
