Cisco DPR2320 Installation And Operation Manual Download Page 74

Page: 74 / 170

Chapter 4 Advanced Features

68-4004214-01 Rev D

Setup Advanced Settings - Port Triggers Page Example

The following illustration is an example of the Setup Advanced Settings - Port

Triggers page.

Setup Advanced Settings - Port Triggers Page Description

Use this page to enter and enable the port forwarding trigger and target range start

and end ports along with protocol information in the appropriate fields. The

following example illustrates how to use the port triggering feature to configure the

Microsoft X-Box Online Live for Internet gaming.

Note:

For most widely used applications (including Microsoft X-Box Online Live),

the built-in firewall automatically maps and opens ports required for that

application while the application is in use.

Summary of Contents for DPR2320











































































































































































Search results

Summary of Contents for DPR2320

Reviews:

Related manuals for DPR2320

Brands by name

Popular brands

Cisco DPR2320, Installation And Operation Manual

Search results

Summary of Contents for DPR2320

Reviews:

Related manuals for DPR2320

Brands by name

Popular brands