Cisco DDR2200 Series, Installation And Operation Manual

Page: 256 / 276

Chapter 7 Advanced Configuration
234 4036168 Rev A
3 Click Routing . The Routing screen opens.
4 Click Default Gateway . The Default Gateway screen opens.
5 Do you want to enable the automatic assigned default gateway?

If yes , be sure the Enable Automatic Assigned Default Gateway check box is
checked. If this check box is checked, the residential gateway will accept the
first received default gateway assignment from one of the PPPoA, PPPoE or
MER/DHCP enabled PVC(s).

If no , be sure the Enable Automatic Assigned Default Gateway check box is
unchecked. If the check box is not checked, enter the default gateway IP
address AND/OR a WAN interface from the drop-down list for the Use
Interface field.
6 Click Save/Apply to save your selection.