Cisco DDR2200 Series, Installation And Operation Manual

Page: 175 / 276

Wireless Bridge
4036168 Rev A 153
Wireless Bridge
Wireless LAN Bridging (also referred to as a Wireless Distribution System, WDS)
refers to two or more 802.11 access points that send traffic between them (from
access point to access point) as opposed to between access point and a client
computer.
The Wireless Bridge screen allows you to configure the wireless bridge features of
the wireless LAN interface as follows:

Select Wireless Bridge in the AP mode to disable access point functionality.

Select Access Point in the AP mode to enable access point functionality. Wireless
bridge functionality will still be available and wireless stations will be able to
associate to the AP.

Select Disabled in the Bridge Restrict field to disable wireless bridge restriction
so any device can communicate with the residential gateway over the wireless
bridge.

Select Enabled in the Bridge Restrict field to enable wireless bridge restriction to
restrict the bridges that can communicate with the residential gateway over the
wireless interface.

Enter the MAC Address of the remote bridge in the Remote Bridges MAC
Address field.
Path : Home Network > Wireless > Advanced > Wireless Bridge
Bridge Restrict Disabled