3-7
Cisco CVA122/CVA122E Hardware Installation Guide
OL-0799-02 (05/2001)
Chapter 3
Installing the Cisco CVA122/CVA122E Cable Voice Adapter
Physical Placement
Figure 3-2
Cisco CVA122/CVA122E Cable Voice Adapter (Side Mounted)
Step 4
Place the cable voice adapter and stand on any stable, hard surface, using the following guidelines:
•
Close to the cable TV drop connection and all devices to be connected at the subscriber site.
•
Install the cable voice adapter in compliance with all national and local electrical codes such as:
–
US NFPA 70
–
Canadian Electrical Code, part I, CC22.1
–
IEC 364, part 1 through part 7
•
The top and sides of the cable voice adapter must remain unobstructed to ensure adequate airflow
and to prevent the unit from overheating.
•
The cable voice adapter should have at least 3 inches of clearance at the rear to allow sufficient
space for the connected cables without crimping.
Wall Mounting the Cisco CVA122/CVA122E Cable Voice Adapter
To mount the Cisco CVA122/CVA122E Cable Voice Adapter on a cement, wood, or drywall, do the
following:
35993
