11
Cisco CompactFlash Adapter for Bootflash Upgrade Installation Note
78-17277-05
Installing the SP Bootflash Memory Upgrade Kit
Step 6
Depending on the orientation of the slots in the chassis (horizontal or vertical), perform one of the
following two sets of steps:
Horizontal slots
a.
Place your thumbs on the left and right ejector levers, and simultaneously rotate the levers outward
to unseat the supervisor engine from the backplane connector. (See
Figure 2
.)
b.
Grasp the front edge of the supervisor engine, and slide the supervisor engine partially out of the
slot. Place your other hand under the supervisor engine to support the weight of the module. Do not
touch the module circuitry. (See
Figure 3
.)
Vertical slots
a.
Place your thumbs on the ejector levers located at the top and bottom of the supervisor engine, and
simultaneously rotate the levers outward to unseat the supervisor engine from the backplane
connector.
b.
Grasp the edges of the supervisor engine, and slide the supervisor engine straight out of the slot. Do
not touch the module circuitry.
Step 7
Immediately place the supervisor engine on an antistatic mat or antistatic foam.
