Cisco C880 M5, Service Manual

Page: 22 / 174

22
SET0202000
2.2 Work Items, Work Assignment, and Work Time
“Table 2.2” lists the work items, standard work time, and the person in charge of these types of work.
Table 2.2
Work item Person in charge Work time
(minute)
Checking the delivered items Service engineer 5
Installing option Service engineer 30
Verifying operation Service engineer 5
Preparation of handing over to
the system administrator
Service engineer 1
Handover to the system administrator System administrator and
Service engineer
5
SET0203000
2.3 Procedure for installing a system board
SET0203010
2.3.1 Checking the delivered items
(1) Check the delivered items by confirming the following.
1. The types and quantities of delivered options match those written on the order sheet.
2. The delivered items match those listed in the List of Accessories.
3. All cabinets are free of any abnormalities such as scratches, dents, or dirt.
4. The specifications and version level of units delivered separately due to delivery considerations
are available for the target functions.
(2) Proceed to “ 2.3.2 Installing option ”.
SET0203020
2.3.2 Installing option
Install according to the following procedures.
ANNT)
- The installation location and quantity have to indicate by the system administrator.
- Confirm connecting position of power cable of the Base Unit beforehand.
(1) Turn off AC power of the Base Unit.
(2) Remove the system board dummy.
(3) Install the system board.
(4) Turn on AC power of the Base Unit.
→ Wait about a minute until green indicator of t he “System Power” is turned off.
(5) Make sure that the Alarm indicator of the system board is not lit. (See “Figure 2.3.2”.)