7
•
Router:
192.168.42.1
Step 7
Click
OK
.
Connect to the Appliance
The Cisco C190 appliance has two gigabit network ports:
Data 1
and
Data 2
. At least one static IP address is required to send and receive
email.
You can receive and deliver email from a single connection to either network
port if your network topology dictates it. Two IP addresses can be configured on
one network interface.
Alternatively, you can connect the
Data 1
network port to your public network
and connect the
Data 2
network port to your private network.
To access the appliance by Ethernet, connect to
Data 1
as your management
interface and configure incoming email on
Data 2
.
For serial access to the appliance, connect to the console port.
Item
Port
Description
1
Remote
Power Cycle
The port that is used for Remote
Power Cycle (RPC).
2
Console
The console port that directly
connects a computer to the
appliance.
3
Data 1
A Gigabit Ethernet customer data
interface. This port is used as a
management interface.
4
Data 2
A Gigabit Ethernet customer data
interface.
