2-15
Cisco BBSM Hotspot 1.0 User Guide
78-15293-01
Chapter 2 Setting Up BBSM Hotspot
Running the Setup Wizard
Step 15
Click
OK
. The Discovering Network Devices Results window appears, listing discovery results and a
summary of devices found. If the wizard located less devices than you entered in the “Number of
Network Devices” field in
Step 12
, BBSM Hotspot shows the reduced number that were found. The
reasons for the discrepancy can include the following:
–
Intentional discrepancies may exist, because addresses were included for future system growth.
–
The physical connections may be faulty.
–
The IP address and SNMP password may not be configured correctly.
–
The correct network device cannot be found for each IP address.
You are asked if you want to change the network device configuration parameters:
–
Click
Back
to make corrections, such as reconnecting a cable, then retest the server. Then
continue with the setup.
–
To change your network device data, click
Yes
. Then click
Next
to continue. You are returned
to the Enter Network Device Configuration Parameters window where you can change the
network device data. Then continue with the setup.
–
If you choose not to change your network device data; for example, if you assigned additional
addresses for future system growth, click
No
to ignore the discrepancy and continue with the
setup.
–
Click
Cancel
to stop the setup.
(See
Figure 2-15
.)
Figure 2-15 Discovering Network Devices Results Window
Step 16
Click
Next
. The Create Custom Web Page window appears. The wizard prompts you to decide if you
want to create a custom web page now or use the default web pages that ship with BBSM Hotspot:
