To install the router chassis in the equipment rack, perform these steps:
Procedure
Step 1
Position the chassis in the rack as follows:
• If the front of the chassis (front panel) is at the front of the rack, insert the rear of the chassis between
the mounting posts.
• If the rear of the chassis is at the front of the rack, insert the front of the chassis between the mounting
posts.
Step 2
Align the mounting holes in the bracket (and optional cable guide) with the mounting holes in the equipment
rack.
Do not use interface module and power supply ejector handles to lift the chassis; using the handles
to lift the chassis can deform or damage the handles. Installing the Chassis to support the Japanese
JIS Rack Standard.
Caution
Figure 2: Installing the Chassis in a 19-inch EIA Rack
Installing the Cisco ASR 907 Router
3
Installing the Cisco ASR 907 Router
Installing the Router Chassis in the Rack
