To reduce the risk of electric shock, fire or personal injury, do not place power cables in areas where they
may be walked on or damaged by items placed upon or against it. Statement 0417
Warning
This product is intended for use in a normal environment based on the standard IEC 60950-1. Do not use
the product in vehicles, on board ships, in aircrafts or in medical applications with physical connection to
the patient, nor in environments with exposure to moisture, dust, vibration or ingress of water. Statement
0418
Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement
1001
Warning
Read the installation instructions before connecting the system to the power source. Statement 1004
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions
to ensure that the system remains stable. The following guidelines are provided to ensure your safety:
This unit should be mounted at the bottom of the rack if it is the only unit in the rack. When mounting
this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at
the bottom of the rack. If the rack is provided with stabilizing devices, install the stabilizers before mounting
or servicing the unit in the rack. Statement 1006
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be accessed
only through the use of a special tool, lock and key, or other means of security. Statement 1017
Warning
If the symbol of suitability with an overlaid cross appears above a port, you must not connect the port to
a public network that follows the European Union standards. Connecting the port to this type of public
network can cause severe injury or damage your router. Statement 1031
Warning
Do not use this product near water; for example, near a bath tub, wash bowl, kitchen sink or laundry tub,
in a wet basement, or near a swimming pool. Statement 1035
Warning
Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
Statement 1036
Warning
Cisco ASR 902 and ASR 902U Aggregation Services Router Hardware Installation Guide
40
Preparing for Installation
Standard Warning Statements
