Interface Modules
The Cisco ASR 902 Router interface modules are field-replaceable units.
On RSP-1, Slot 2 Port 0 cannot be used for traffic flow on 8X1-G copper and 8X1-G SFP interface modules.
To identify Slot 2 on a Cisco ASR 902 Router, see the figure in the
Interface Numbering, on page 36
section.
Note
In addition to the ports provided on an RSP, the Cisco ASR 902 Router supports the following interface
modules:
Gigabit Ethernet SFP Interface Module
The Gigabit Ethernet Small Form-Factor Pluggable (SFP) interface module provides eight Gigabit Ethernet
SFP modules. The figure below shows the 8-port 1Gigabit Ethernet SFP interface module.
Figure 13: 8 x 1-Gigabit Ethernet SFP Interface Module
For information on supported SFP modules, see
Cisco ASR 900 Series Aggregation Services Routers Data
For more information about installing an SFP Gigabit Ethernet module, see the
Cisco ASR 902 and ASR 902U Aggregation Services Router Hardware Installation Guide
22
Overview
Interface Modules
